LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Volkswagen >> 2016 >> Tiguan R-Line, AWD >> Repair and Diagnosis >> Transmission >> Automatic Trans >> 2.0L - Generic Scan Tool - Engine Code: CCTA (1 Of 2) >> St Generic Scan Tool >> Diagnosis And Testing >> Diagnostic Modes 01 - 09 >> Diagnostic Mode 06 - Read Test Results For Specific Diagnostic Functions 2015 >> Monitor-ID $3D: EVAP Valve Function Check
April 5, 2026: LEMON Manuals is launched! Read the announcement.

Monitor-ID $3D: EVAP Valve Function Check

-- Connect the scan tool.

-- Start the engine and run at idle.

-- Select "Mode 6: Check test the results of components that are not continuously monitored".

Select "Monitor-ID 3D".

-- Select the desired "Test-ID".

-- Check specified values at idle.

Test-ID DTC Component or System Min. Max. Additional Information
$80 P0441 Tank vent valve check from % DTEV: Active test Air balance at idle OK, (Normal operation and short test 70). .350 1.999 Refer to DTC P0441 in the DTC summary table.Engine Control Module --, 2015 MY
$88 - Purge flow OK by deviation lambda control. 1 65535 Refer to DTC P0441 in the DTC summary table.Engine Control Module --, 2015 MY

-- If any of components or systems fail to meet the specified values. Refer to Diagnostic "Mode 03: Interrogating Fault Memory" to check for stored DTC's or the corresponding diagnostic repair procedure DIAGNOSTIC MODE 03 - READ DTC MEMORY .

-- Switch the ignition off.

scientia non olet · About LEMON Manuals