Abs Control Module And Abs Hydraulic Unit, Removing And Installing, Diesel Engine: Installing
Install in reverse order of removal and note the following:
NOTE:
Only remove the plugs on the new hydraulic unit if the corresponding brake line is installed.
If the plugs are removed too early from the hydraulic unit, brake fluid can escape and the unit may not be sufficiently filled or adequately bled.
When installing the hydraulic unit, make sure the damper rubber is not pushed out of the bracket.
-- Before assembling the holder for the ABS Hydraulic Unit -N55- in the bracket, spray the rubber bushings with Silicone Lubricant Spray: D 007 000 A2 .
-- Install the brake lines carefully with the :VAG1410/8 .