Power Window Regulators, Checking Position
After disconnecting and reconnecting the battery, the power window one-touch up/down function does not work. Therefore, the electric windows must be positioned again immediately, before a new vehicle is delivered. The vehicle battery must not be disconnected after positioning.
After disconnecting and reconnecting the battery, force limitation of the power window regulators will not function. This can cause serious injuries if, for example, fingers are caught in the window!
Perform the following to position the power windows:
The following procedure description is for the left front window. The positioning for the remaining windows is performed by pressing/pulling the respective button in the driver door.
-- Switch on the ignition.
-- Close all doors and windows completely.
-- Hold left front side-window in position "Close" by pulling and holding switch for longer than 1 second.
-- Pull the button again for one second. Now when the button is pressed briefly the window will lower fully and when the button is lifted briefly the window will raise fully.
-- Turn off the ignition.