Engine Speed Sensor -G28-, Removing And Installing: Removing

WARNING: This page is about a different variant/trim than selected.

-- Remove the noise insulation. Refer to OVERVIEW - NOISE INSULATION .

-- Disconnect the coolant hose -1- from the charge air pipe and push upward.

Courtesy of VOLKSWAGEN GROUP OF AMERICA, INC.

Vehicles with Coolant Valve

Courtesy of VOLKSWAGEN GROUP OF AMERICA, INC.

-- Disconnect the connector -2-.

-- Remove the nuts -arrows- and push the coolant valve -1- to the side.

All Vehicles

Courtesy of VOLKSWAGEN GROUP OF AMERICA, INC.

-- Disconnect the connector -1- from the Engine Speed Sensor -G28-.

-- Remove the bolt -arrow- and the Engine Speed Sensor -G28-.