Control Module For Adaptive Cruise Control J428, Removing And Installing: Removing
WARNING: This page is about a different car, the 2023 Volkswagen ID.4. However, it is still accessible from the selected car via links, so may be relevant.
The Control Module for Adaptive Cruise Control -J428- will be called the control module in the information that follows.
If the control module is replaced, the test plan to replace the control module must be performed.
-- Perform the function "Control Module for Adaptive Cruise Control" using the Vehicle Diagnostic Tester. Refer to Diagnostic Entries .
Continuation
-- Open the hood.
-- Disconnect the connector -2-.
-- Remove the bolts -1-.
-- Remove the bracket -3- with the control module.