Calibration Unit:VAS 6350A, INSTALLING AND ALIGNING: Notes
WARNING: This page is about a different car, the 2023 Volkswagen Atlas. However, it is still accessible from the selected car via links, so may be relevant.
CAUTION:
- If the vehicle is configured with PR + KA1 the rearview camera system does not have to be calibrated after removing and installing the Rearview Camera -R189-, because the calibration of the rearview camera system automatically takes place.
- If the vehicle is configured with PR + KA2 the rearview camera system must be calibrated after removing and installing the Rearview Camera -R189-.
After performing repair work on the vehicle, it may be necessary to re-calibrate the rearview camera system. In detail, this is the case after:
- Removing and installing the rear lid handle button with Rearview Camera -R189-
- After repair work performed on rear lid following an accident
- After an axle alignment
- After performing a repair at front or rear axle