Blind Spot Detection Control Module -J1086- / Blind Spot Detection Control Module 2 -J1087-, REMOVING AND INSTALLING: Removing
WARNING: This page is about a different car, the 2023 Volkswagen Atlas. However, it is still accessible from the selected car via links, so may be relevant.
-- Remove the rear bumper cover. Refer to BUMPER COVER, REMOVING AND INSTALLING .
-- Release the retaining tab -5- from the bracket -2-.
-- Remove the Blind Spot Detection Control Module 2 -J1087- -1- in direction of the -arrow- out of the bracket -2- until the connector -3- is accessible.
-- Release and disconnect the connector -3-.
-- Remove the nuts -4- for the bracket -2-
-- Remove the bracket -2- from the body.