Peripheral Camera Control Module J928, Removing And Installing: Removing
WARNING: This page is about a different car, the 2023 Volkswagen ID.4. However, it is still accessible from the selected car via links, so may be relevant.
If the control module is replaced, the test plan to replace the control module must be performed.
-- Perform the function "peripheral camera control module, replacing" using the Vehicle Diagnostic Tester. Refer to Diagnostic Entries .
Continuation
-- Remove the seat pan. Refer to SEAT PAN, REMOVING AND INSTALLING .
-- Disconnect the connectors.
-- Loosen the expanding rivets -2- and remove the control module -1-.