Control Module for Emergency Call Module and Communication Unit -J949-, REPLACING

WARNING: This page is about a different car, the 2021 Volkswagen Tiguan, 2020 Volkswagen Tiguan, 2019 Volkswagen Tiguan, and 2018 Volkswagen Tiguan. However, it is still accessible from the selected car via links, so may be relevant.

Control Module for Emergency Call Module and Communication Unit -J949-, Replacing and Adapting

Current data for the "Guided Fault Finding"

-- Select the Replace control module function on the Vehicle Diagnostic Tester in the Guided Fault Finding or Guided Functions mode for the Control Module for Emergency Call Module and Communication Unit -J949-.

-- Remove the Control Module for Emergency Call Module and Communication Unit -J949-. Refer to Control Module for Emergency Call Module and Communication Unit -J949-, REMOVING AND INSTALLING .

-- Install the new Control Module for Emergency Call Module and Communication Unit -J949-. Refer to Control Module for Emergency Call Module and Communication Unit -J949-, REMOVING AND INSTALLING .

-- Select the Coding function on the Vehicle Diagnostic Tester in the Guided Fault Finding or Guided Functions mode for the Control Module for Emergency Call Module and Communication Unit -J949-.

-- Select the Adapting to Immobilizer function on the Vehicle Diagnostic Tester in the Guided Fault Finding or Guided Functions mode for the Control Module for Emergency Call Module and Communication Unit -J949-.

-- Select the Activating function on the Vehicle Diagnostic Tester in the Guided Fault Finding or Guided Functions mode for the Control Module for Emergency Call Module and Communication Unit -J949-.

-- Exit Guided Fault Finding or Guided Functions .

-- Switch off the ignition.