Vehicle Positioning System Control Module, Removing And Installing: Removing
WARNING: This page is about a different car, the 2018 Volkswagen Jetta, 2017 Volkswagen Jetta, 2016 Volkswagen Jetta, and 2015 Volkswagen Jetta. However, it is still accessible from the selected car via links, so may be relevant.
-- Turn off the ignition and all electrical consumers and remove the ignition key.
-- Remove the luggage compartment left trim panel. Refer to LUGGAGE COMPARTMENT TRIM PANELS .
-- Remove the bolt -3-.
-- Remove the screw -4-.
-- Remove the Vehicle Positioning System Control Module -J895- -1- from the bracket -2-.
-- Disconnect the connector on the Vehicle Positioning System Control Module - J895- -1-.