Cell Phone Operating Electronics Control Module -J412- CONNECTOR ASSIGNMENT
WARNING: This page is about a different car, the 2018 Volkswagen Jetta, 2017 Volkswagen Jetta, 2016 Volkswagen Jetta, and 2015 Volkswagen Jetta. However, it is still accessible from the selected car via links, so may be relevant.
A -
Multi-pin connector, 54-pin
- Terminal 30
- Terminal 31
- Switch on signal
- LF (+) left to Radio -R-
- LF (-) left to Radio -R-
- LF (+) from Control Module for Emergency Call Module and Communication Unit -J949-
- LF (-) from Control Module for Emergency Call Module and Communication Unit -J949-
- LF (+) right to Radio -R-
- LF (-) right to Radio -R-
- Not Assigned
- Telephone Microphone -R38- (+) from RNS
- Telephone Microphone -R38- (-) from RNS
- Not Assigned
- Not Assigned
- Not Assigned
- Not Assigned
- CAN Bus high
- CAN Bus low
- Not Assigned
- Not Assigned
- Not Assigned
- LF (+) Right to the Radio - R-, Multimedia Socket MEDIA-IN
- LF (+) Left to the Radio - R-, Multimedia Socket MEDIA-IN
- LF-Ground to the Radio - R-, Multimedia Socket MEDIA-IN
- Not Assigned
- Not Assigned
- Not Assigned
- Not Assigned
- Not Assigned
- Cellular Telephone Preparation Control Head -E508-
- Cellular Telephone Preparation Control Head -E508-
- Not Assigned
- Left audio signal from External Audio Source Connection -R199-, AUX IN
- Right audio signal from External Audio Source Connection -R199-, AUX IN
- Audio ground from External Audio Source Connection -R199-, AUX IN
- Audio ground shielding from External Audio Source Connection -R199-, AUX IN
- Not Assigned
- Terminal 30 to Telephone Baseplate -R126-
- Not Assigned
- DIAG signal from Telephone Baseplate -R126-
- Not Assigned
- Not Assigned
- Not Assigned
- Not Assigned
- Not Assigned
- Not Assigned
- Prompt Wire to Telephone Baseplate -R126-
- DIAG signal from Telephone Baseplate -R126-
49 through 54 - not assigned