ATF Level, Checking: Filling

WARNING: This page is about a different car, the 2021 Volkswagen Tiguan, 2020 Volkswagen Tiguan, 2019 Volkswagen Tiguan, 2018 Volkswagen Tiguan Limited, and 2018 Volkswagen Tiguan. However, it is still accessible from the selected car via links, so may be relevant.

-- Install the adapter from the : VAS6262A into the check hole hand-tight.

Fig 1: Identifying Oil Filling Adapter - VAS 6262 A-

Courtesy of VOLKSWAGEN GROUP OF AMERICA, INC.

-- Shake the fluid containers before opening.

-- Attach the : VAS6262A to the fluid bottle. Pay attention to the instructions while doing so. Refer to ATF LEVEL, CHECKING - Note the following information: .

-- Fill one liter of ATF.

-- Remove the : VAS6262A at the quick-release coupling and check it.

If ATF Flows out of the Adapter Hole:

ATF does not need to be topped off.

-- Allow the ATF to drain until it drips.

-- Tighten the ATF check plug with new seal. The ATF level test is now completed.

If no ATF Drips Out of the Hole:

-- Add another liter. Refer to Filling .

NOTE:

If the ATF circuit is opened, it must be bleed after checking the ATF circuit. Refer to ATF CIRCUIT, BLEEDING .

Then the ATF level must be checked again. Refer to Checking .

Tightening Specifications

Refer to OVERVIEW - VALVE BODY