Selector Lever Cable, Checking And Adjusting: Notes
WARNING: This page is about a different car, the 2021 Volkswagen Tiguan, 2020 Volkswagen Tiguan, 2019 Volkswagen Tiguan, 2018 Volkswagen Tiguan Limited, and 2018 Volkswagen Tiguan. However, it is still accessible from the selected car via links, so may be relevant.
Special tools and workshop equipment required
- Torque Wrench 1331 5-50Nm: VAG1331
Brief Description
To check the selector lever cable for ease of movement, remove it from the transmission and position the removed end so it does not make contact anywhere.
The selector lever is then moved and then the selector lever cable is re-attached.
After that, the selector lever cable must be adjusted. Refer to Adjusting: .
Do not grease the selector lever cable connection.