Engine Speed Sensor -G28-, REMOVING AND INSTALLING: Notes

Special tools and workshop equipment required

Hex Socket - 4mm: T10370

Fig 1: Identifying Hex Socket
Courtesy of VOLKSWAGEN GROUP OF AMERICA, INC.

CAUTION:

The factory installed sensor and ignition system are not suitable for checking and repair purposes. Interchanging sensors from the ignition system can lead to engine malfunction and drivability problems.

- Only replace the factory installed sensor with the corresponding sensor according to the Parts Information.

- Do not use the factory installed sensor for checking and repair purposes.

- Do not interchange the sensors with each other or between different vehicles.