Control Module For Emergency Call Module And Communication Unit -J949-, Removing And Installing, Rear Bench Seat: Removing

The Control Module for Emergency Call Module and Communication Unit -J949- will be called control module in the information that follows.

If the control module is replaced, the test plan to replace the control module must be performed.

-- Perform the function "Emergency call control module, replacing" using the Vehicle Diagnostic Tool. Refer to Diagnostic Entries .

Continuation

-- Bench seat/individual seats, removing and installing. Refer to BENCH SEAT/SINGLE SEAT, REMOVING AND INSTALLING .

-- Loosen the rear sill panel. Refer to REAR SILL PANEL, REMOVING AND INSTALLING .

-- Fold the carpet forward until the control module is accessible. Refer to CARPET, REMOVING AND INSTALLING .

-- Pivot out the bracket -2- in -direction of the arrow-.

Courtesy of VOLKSWAGEN GROUP OF AMERICA, INC.

-- Disconnect the connectors -1-.

Courtesy of VOLKSWAGEN GROUP OF AMERICA, INC.

-- Release the hook -2- and remove the control module -1-.

Courtesy of VOLKSWAGEN GROUP OF AMERICA, INC.