Driver Assistance Systems Front Camera -R242-, REMOVING AND INSTALLING: Installing
WARNING: This page is about a different car, the 2025 Audi S3, 2025 Audi RS 3, and 2025 Audi A3 Quattro. However, it is still accessible from the selected car via links, so may be relevant.
- The camera field of vision on the inside of the windshield must not be fogged up or dirty.
- The clips must be replaced each time the front camera is removed.
-- Remove the clip -2- in the -direction of the arrow- from the mount -1- and insert a new one.
-- Clean the viewing window on the windshield with Cleaning Solution :D 009 401 04 .
Install in reverse order of removal. Note the following:
-- Calibrate the driver assistance systems front camera after installation. Refer to DRIVER ASSISTANCE SYSTEMS FRONT CAMERA, CALIBRATING .