Windshield Projection Head Up Display Control Module, Removing And Installing: Installing
WARNING: This page is about a different car, the 2025 Audi S3, 2025 Audi RS 3, and 2025 Audi A3 Quattro. However, it is still accessible from the selected car via links, so may be relevant.
Install in the reverse order of removal while noting the following:
CAUTION:
The windshield projection head up display control module due to impact or pressure.
- Never install a windshield projection head up display control module which fell on the floor.
- Never apply any pressure on the housing upper section when inserting the windshield projection head up display control module.
-- Insert the control module and tighten the bolts.
-- Turn on the ignition, activate the head up display and check the functionality of the control module.