Component Test Mode: Introduction
- This test mode is used to check the components that comprise cruise control system. By activating components one by one, and by giving control unit a response code if control unit has received a signal from component, sensor as well as wiring and connections can be checked. See COMPONENT TEST MODE CODES .
- If no response code is obtained, continue with testing. Repeat SYSTEM COMPONENT CHECK (below) if repairs have been made to ensure system functions properly.
COMPONENT TEST MODE CODES
| Code | Activated Component |
|---|---|
| 1-1-3 | Selector ON/OFF, Brake Valve |
| 1-2-3 | Selector RESUME |
| 1-3-1 | Selector SET |
| 1-3-2 | Brakelight Switch |
| 2-2-3 | Neutral Start Switch |
| 3-1-1 | Several Signals |