Checking compression: Verification
HINT: After carrying out the repair check that the fault has been remedied. Carry out the following:
- Ignition off.
- Disconnect the engine speed (RPM) sensor.
- Disconnect the camshaft position (CMP) sensor.
- Remove spark plug.
- Carry out a compression test at wide open throttle (WOT) and turn the starter motor.
Normal value 1.3 - 1.5 MPa (13 - 15 kp/cm2 ) with engine at operating temperature
- Carry out a compression test at wide open throttle (WOT) and turn the starter motor.
Is compression OK?
- YES
OKAY: Troubleshooting has been completed.
- NO
Refer to Information