LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Volvo >> 1998 >> S90 AW30-40 >> Repair and Diagnosis (Single Page) >> Body & Frame >> Door Locks >> Keyless Entry System & Door Locks - Power >> Programming >> Receiver Module Programming
April 5, 2026: LEMON Manuals is launched! Read the announcement.

Receiver Module Programming

  1. Receiver module must be reprogrammed if a new transmitter is used. When programming receiver, ensure each unique key code is entered. Receiver memory can hold up to 4 transmitter codes.
  2. Before starting reprogramming, ensure remote control transmitter uses same frequency as receiver. Receiver module is marked with a letter, and transmitter has a part number on its case. See RECEIVER & TRANSMITTER IDENTIFICATION table.
    RECEIVER & TRANSMITTER IDENTIFICATION

    Receiver Module Marking Transmitter Part No.
    "A" (9148647) 9148646
    "C" (9128710) 9128709
    "H" (9128928) 9128927
  3. To reprogram receiver module, turn ignition switch to ON and OFF positions 5 times in 10 seconds. Leave ignition on after fifth time. Within 30 seconds, press either button on transmitter once. Turn ignition off.
scientia non olet · About LEMON Manuals