LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Volvo >> 2000 >> C70 2D Convertible, 2.3 53, Automatic >> Repair and Diagnosis >> Engine Performance >> Engine Control Systems >> Engine With Mountings And Equipment- Engine Control (Convertible) >> Diagnostic test mode (DTM) 6 - Data entry >> Notes
April 5, 2026: LEMON Manuals is launched! Read the announcement.

Diagnostic test mode (DTM) 6 - Data entry: Notes

Fig 1: Identifying Number Of Times To Press Data Link Connector (DLC) Switch & Results
GLL125503Courtesy of VOLVO CARS OF NORTH AMERICA.

Diagnostic test mode (DTM) 6 is used when replacing the combined instrument panel.

NOTE:

When replacing the combined instrument panel check the following data and if necessary program it into the new combined instrument panel.

  1. 1) Speedometer calibration code (selecting speedometer type).
  2. 2) Mileage. The mileage from the old combined instrument panel must be transferred.
  3. 3) Criteria for service reminder indicator (SRI) activation are always programmed and should only be reprogrammed if another service reminder indicator (SRI) parameter is required.
NOTE:

This programming can only be carried out once for each instrument. It is important to do it correctly. Use a text readout unit if possible.

scientia non olet · About LEMON Manuals