Component Test Mode: Introduction
- This test mode is used to check the components that comprise cruise control system. By activating components one by one, and by giving control unit a response code if control unit has received a signal from component, sensors as well as wiring and connections can be checked. See COMPONENT TEST MODE CODES table.
- If correct response code is not obtained, go to appropriate test for that particular response code. If correct response codes are obtained, go to VACUUM SYSTEM CHECK .
COMPONENT TEST MODE CODES
| Code | Activated Component | ||
|---|---|---|---|
| 113 | Main Switch ON/OFF | ||
| With Main Switch In ON Position | |||
| 113 | Brake Or Clutch Valve | ||
| 123 | RESUME Selected | ||
| 131 | SET+ Selected | ||
| 213 | SET- Selected | ||
| 223 | Shift A/T From "N" To "D" | ||
| With Main Switch In OFF Position | |||
| 132 | Depress Brake Pedal | ||
| 311 | Several Signals | ||