Transferring Components
WARNING: This page does not describe the selected car, but rather 9 other vehicles, including the 2009 Volvo S60, 2008 Volvo S60, 2007 Volvo S60, 2006 Volvo S60, and 2005 Volvo S60. However, it is still accessible from the selected car via links, so may be relevant.
Transfer:
- the control arms. Use new screws and new nut. Tighten the front screws. Tighten to 65 Nm . Angle-tighten 90° . Use bevel protractor 9512050 . Tighten the rear screw. Tighten to 105 Nm . Angle-tighten 90°
- the anti-roll bar. Tighten to 60 Nm
- the right-hand engine mounting. Tighten the screws. Tighten to 65 Nm . Angle-tighten 60°
- the exhaust mounting bracket. Tighten to 50 Nm
- the shock absorber Tighten to 50 Nm
- lower torque rod. Tighten to 65 Nm . Angle-tighten 90° .
Install new pipe/hose holders.