Removing The Engine Control Module (ECM)
WARNING: This page does not describe the selected car, but rather 9 other vehicles, including the 2009 Volvo S60, 2008 Volvo S60, 2007 Volvo S60, 2006 Volvo S60, and 2005 Volvo S60. However, it is still accessible from the selected car via links, so may be relevant.
- Ignition off. Wait for 2 minutes
- Remove the cover over the control module box. Put the cover to one side
-
NOTE:
Do not touch the control module terminal pins with your fingers. Static electricity may damage components in the control module.
- Insert tool 9995722 around the control module.
- Move the upper section of the tool backwards as far as it will go. Pull up the tool
- Carefully pull up the control module.