Reading Off Input And Output Signals
WARNING: This page does not describe the selected car, but rather 9 other vehicles, including the 2009 Volvo S60, 2008 Volvo S60, 2007 Volvo S60, 2006 Volvo S60, and 2005 Volvo S60. However, it is still accessible from the selected car via links, so may be relevant.
This function can be used to continuously read off the values and status of the control module's input and output signals.
The key must not be in the ignition when reading off the status of the door mirror lamp.
Lock cable M1, status, is active while locking the central locking
Lock cable M2, status, is active while unlocking the central locking and / or deadlocks
Lock cable M3, status, is active while locking the deadlocks
The following parameters can be read off:
- The status of the front passenger window up-control
- The status of the front passenger window down-control
- The status of the front passenger window auto-control
- The status of the up-motor for the power window
- The status of the down-motor for the power window
- Lock cable M1, status
- Lock cable M2, status
- Lock cable M3, status
- The status of the door open warning lamp (does not apply to all cars)
- The status of the control for the door mirror
- Defroster, status
- Door mirror lamp, status
- Outside temperature, valueNOTE:
The outside temperature can only be read off from the control module on the right-hand side of the car.
- Power supply, value
- Signal supply, value
- Door mirror position X axis, value (does not apply to all cars)
- Door mirror position Y axis, value (does not apply to all cars).