Checking The Software

Fig 1: Identifying Ignition ON

Courtesy of VOLVO CARS CORPORATION

• Ignition on
• Read off the software version from the brake control module (BCM).

  Check that the diagnostic number corresponds to the car configuration. If the software does not correspond to the car configuration, make a bookmark and cancel the fault-tracing. Then go to the software manager and download the correct software. Then resume the fault-tracing.

  Fig 2: Identifying VCT2000 Diagnostic Tool Symbol In VIDA

  Courtesy of VOLVO CARS CORPORATION

Was the control module programmed with the correct software? 

• YES 

  see CHECKING THE CAR CONFIGURATION 

• NO 

  see ERASING DIAGNOSTIC TROUBLE CODES (DTCS)