Steering Angle Sensor (SAS) Module, Replacing

Steering angle sensor (SAS) module, replacing

Soundproofing panel





Remove the driver's side soundproofing panel.

Control module
Remove the control module by pressing the 2 catches using a finger and pulling the control module backwards (see the arrow). Remove the connector and the cable.

Installation
The control module





Install the cable in the holder for the control module. Press the connector into place. Reinstall the control module. Press the module into place until there is an audible click.

Ordering software
Order the software.

Programming the steering wheel angle sensor module (SAS)
Program the new control module.
The soundproofing panel Install the driver's side soundproofing panel.