Checking the Brake failure warning lamp I: Verification

HINT: After carrying out the repair, check that the fault has been remedied as follows: 

Fig 1: Identifying Ignition ON

Courtesy of VOLVO CARS OF NORTH AMERICA.

Fig 2: Connecting Control Module

Courtesy of VOLVO CARS OF NORTH AMERICA.

• Ignition off.
• Reinstall the connectors, components etc.
• Ignition on.

  Check that the lamp lights when the ABS control module carries out the lamp check. The lamp must light and go out after approximately 2 seconds.

Does the lamp light for 2 seconds? 

• YES 

  VERIFIED:  Troubleshooting has been completed.

• NO 

  Refer to Information