Description Of Programmable Parameters, Customer Adaptation

There are two ways of carrying out customer adaptation:

The parameters which can be changed are described in the table below.

Function	Selectable values	Stored in	Remarks
Locking indication via the turn signal lamps	On / off	Central electronic module (CEM)
Unlocking indication via the turn signal lamps	On / off	Central electronic module (CEM)
Automatic locking	On / off	Central electronic module (CEM)
Local lighting	30, 60 or 90 seconds	Central electronic module (CEM)
Approach lights	30, 60 or 90 seconds	Central electronic module (CEM)
Unlocking	Total or 2 stage	Central electronic module (CEM)	This setting applies when unlocking using the remote control.
Passive unlocking	Total unlocking, all doors	Keyless vehicle module (KVM)	Only in vehicles with keyless entry systems.
Passive unlocking	One of the front doors	Keyless vehicle module (KVM)	Only in vehicles with keyless entry systems.
Doors on same side	Keyless vehicle module (KVM)	Only in vehicles with keyless entry systems.
Passive unlocking	Both front doors	Keyless vehicle module (KVM)	Only in vehicles with keyless entry systems.