Extinguished Flame: Verification: Notes

HINT: After carrying out the repair, check that the fault has been remedied. 

Fig 1: Identifying Ignition ON

Courtesy of VOLVO CARS CORPORATION

Fig 2: Checking Connector

Courtesy of VOLVO CARS CORPORATION

• Ignition off
• Reinstall the connectors, components etc.
• Ignition on.

  Erase diagnostic trouble codes (DTCs).

  NOTE:

  Diagnostic trouble codes (DTCs) must be erased to start the heater. Before erasing diagnostic trouble codes (DTCs) all indicated faults must be corrected.

  Fig 3: Identifying VCT2000 Diagnostic Tool Symbol In VIDA

  Courtesy of VOLVO CARS CORPORATION

• Continue 

  Refer to VERIFICATION, CONTINUED