Intermittent fault
- The fault tracing only applies to automatic transmissions
- Ignition off.
Check the signal cable between the central electronic module (CEM) terminal #1D and the gear selector assembly terminal #A3. Check for an open-circuit. Check for contact resistance and oxidation.
Remedy as necessary.
Other information:
- To access or replace the central electronic module (CEM), see Central electronic module (CEM), replacing
- For M56 and M58 2001- see Gear selector lever assembly, replacing
- For AW55-50 and AWD50AWD 2001-, see Gear selector lever assembly, replacing
- For AW55-50 and AWD50AWD 2001- Geartronic, see Gear selector lever assembly Geartronic, replacing .
- To connect the breakout box, see Connecting the breakout box
- For information about signals, see Signal specification
- See Checking wiring and terminals .
- Continue
Refer to Information