Central Electronic Module (CEM), Rear Electronic Module (Rem), Upper Electronics Module (UEM) - Diagnostic Trouble Codes - 5 Of 13

• CEM-1C06: Alternator Control Module (ACM). Electrical Fault (B5204T5; B5254T4; 2005-2007)
  • Diagnostic trouble code (DTC) information CEM-1C06
  • Electrical fault
    • Checking battery voltage
    • Checking the component
    • Verification
      • Verification
    • Information
      • Fault-tracing information
• CEM-1C06: Alternator Control Module (ACM). Electrical Fault (B5244S; 2005-2006)
  • Diagnostic trouble code (DTC) information CEM-1C06
  • Electrical fault
• CEM-1C06: Alternator Control Module (ACM). Electrical Fault (B5244T5; B5254T2; 2005-2009)
  • Diagnostic trouble code (DTC) information CEM-1C06
  • Electrical fault
• CEM-1C07: Alternator Control Module (ACM). Over Heated (B5204T5; B5254T4; 2005-2007)
  • Diagnostic trouble code (DTC) information CEM-1C07
  • Over heated
    • Checking the component
    • Information
      • Fault-tracing information
• CEM-1C07: Alternator Control Module (ACM). Over Heated (B5244S; 2005-2006)
  • Diagnostic trouble code (DTC) information CEM-1C07
  • Over heated
• CEM-1C07: Alternator Control Module (ACM). Over Heated (B5244T5; B5254T2; 2005-2009)
  • Diagnostic trouble code (DTC) information CEM-1C07
  • Over heated
• CEM-1C08: Alternator Control Module (ACM). Mechanical Fault (B5204T5; B5254T4; 2005-2007)
  • Diagnostic trouble code (DTC) information CEM-1C08
  • Mechanical fault
    • Checking battery voltage
    • Checking the auxiliaries belt and belt tensioner
    • Checking the freewheel on a generator (GEN)
    • Checking the component
    • Verification
      • Verification
    • Information
      • Fault-tracing information
• CEM-1C08: Alternator Control Module (ACM). Mechanical Fault (B5244S; 2005-2006)
  • Diagnostic trouble code (DTC) information CEM-1C08
  • Mechanical fault
• CEM-1C08: Alternator Control Module (ACM). Mechanical Fault (B5244T5; B5254T2; 2005-2009)
  • Diagnostic trouble code (DTC) information CEM-1C08
  • Mechanical fault
• CEM-1C0A: Alternator Control Module (ACM). Voltage Too High (B5204T5; B5254T4; 2005-2007)
  • Diagnostic trouble code (DTC) information CEM-1C0A
  • Voltage too high
    • Checking the power supply
    • Checking battery voltage
    • Checking the component
    • Checking the power supply and ground at rear electronic module (REM)
    • Verification
      • Overview
      • Verification
    • Information
      • Fault-tracing information
• CEM-1C0A: Alternator Control Module (ACM). Voltage Too High (B5244S; 2005-2006)
  • Diagnostic trouble code (DTC) information CEM-1C0A
  • Voltage too high
• CEM-1C0A: Alternator Control Module (ACM). Voltage Too High (B5244T5; B5254T2; 2005-2009)
  • Diagnostic trouble code (DTC) information CEM-1C0A
  • Voltage too high
• CEM-1D01: Control Module. Internal Fault (2005-2009)
  • Diagnostic trouble code (DTC) information CEM-1D01
  • Internal fault
    • Replacing the component
    • Information
      • Fault-tracing information
• CEM-1D01: Control Module. Internal Fault. Intermittent Fault (2001-2004)
  • Diagnostic trouble code (DTC) information
  • Internal fault. Intermittent fault
    • Fault-tracing information
• CEM-1D01: Control Module. Internal Fault. Permanent Fault (2001-2004)
  • Diagnostic trouble code (DTC) information
  • Internal fault. Permanent fault
    • Checking programming
    • Replacing the control module
• CEM-1D02: Control Module, Software. Internal Fault. Intermittent Fault (2001-2004)
  • Diagnostic trouble code (DTC) information
  • Internal fault. Intermittent fault
    • Fault-tracing information
• CEM-1D02: Control Module, Software. Internal Fault. Permanent Fault (2001-2004)
  • Diagnostic trouble code (DTC) information
  • Internal fault. Permanent fault
    • Ordering software
    • Programming
    • Programming control module
      • Programming procedures
    • Programming the seat temperature (central electronic module)
      • Programming the seat temperature (central electronic module)
      • Celsius
      • Fahrenheit
      • Checking the left seat
      • Checking the right seat
      • Save the programmed value
    • Programming the home safe lights
      • Programming the home safe lights
      • Save the programmed value
    • Programming daytime running lamps
      • Programming daytime running lamps
      • Save the programmed value
    • Programming the wiper function for the rear windshield (5 door models)
      • Programming the wiper function for the rear windshield (5 door models)
      • Save the programmed value
• CEM-1D02: Control Module. Internal Fault (2005-2009)
  • Diagnostic trouble code (DTC) information CEM-1D02
  • Internal fault
    • Replacing the component
    • Information
      • Fault-tracing information
• CEM-1D03: Control Module Not Fully Programmed. Internal Fault (2005-2009)
  • Diagnostic trouble code (DTC) information CEM-1D03
  • Internal fault
    • Replacing the component
    • Information
      • Fault-tracing information
• CEM-1D03: Control Module Not Fully Programmed. Internal Fault. Intermittent Fault (2001-2004)
  • Diagnostic trouble code (DTC) information
  • Internal fault. Intermittent fault
    • Fault-tracing information
    • Information
      • Fault-tracing information
• CEM-1D03: Control Module Not Fully Programmed. Internal Fault. Permanent Fault (2001-2004)
  • Diagnostic trouble code (DTC) information
  • Internal fault. Permanent fault
    • Fault-tracing information
    • Information
      • Fault-tracing information
• CEM-1D04: ECM, Software. Faulty Signal. Intermittent Fault (2001-2004)
  • Diagnostic trouble code (DTC) information
  • Faulty signal. Intermittent fault
    • Fault-tracing information
• CEM-1D04: ECM, Software. Faulty Signal. Permanent Fault (2001-2004)
  • Diagnostic trouble code (DTC) information
  • Faulty signal. Permanent fault
    • Checking programming
    • Replacing software
• CEM-1D05: TCM, Software. Faulty Signal. Intermittent Fault (2001-2004)
  • Diagnostic trouble code (DTC) information
  • Faulty signal. Intermittent fault
• CEM-1D05: TCM, Software. Faulty Signal. Permanent Fault (2001-2004)
  • Diagnostic trouble code (DTC) information
  • Faulty signal. Permanent fault
    • Checking programming
    • Replacing software
• CEM-1D06: Control Module. Configuration Fault (2002-2004)
  • Configuration fault
    • Ordering software
    • Programming
    • Programming control module
      • Programming procedures
    • Programming the seat temperature (central electronic module)
      • Programming the seat temperature (central electronic module)
      • Celsius
      • Fahrenheit
      • Checking the left seat
      • Checking the right seat
      • Save the programmed value
    • Programming the home safe lights
      • Programming the home safe lights
      • Save the programmed value
    • Programming daytime running lamps
      • Programming daytime running lamps
      • Save the programmed value
    • Programming the wiper function for the rear windshield (5 door models)
      • Programming the wiper function for the rear windshield (5 door models)
      • Save the programmed value
  • Diagnostic trouble code (DTC) information
• CEM-1D06: Control Module. Configuration Fault (2005-2009)
  • Configuration fault
    • Checking the programmed values
  • Diagnostic trouble code (DTC) information CEM-1D06
• CEM-1D07: Control Module. Internal Fault (2005-2009)
  • Diagnostic trouble code (DTC) information CEM-1D07
  • Internal fault
    • Replacing the component
    • Information
      • Fault-tracing information
• CEM-1D07: Control Module. Internal Fault. Intermittent Fault (2001-2004)
  • Diagnostic trouble code (DTC) information
  • Internal fault. Intermittent fault
    • Fault-tracing information
• CEM-1D07: Control Module. Internal Fault. Permanent Fault (2001-2004)
  • Diagnostic trouble code (DTC) information
  • Internal fault. Permanent fault
    • Checking programming
    • Replacing the control module
• CEM-1D08: Control Module. Internal Fault (2005-2009)
  • Diagnostic trouble code (DTC) information CEM-1D08
  • Internal fault
    • Replacing the component
    • Information
      • Fault-tracing information
• CEM-1D08: Control Module. Internal Fault. Intermittent Fault (2001-2004)
  • Diagnostic trouble code (DTC) information
  • Internal fault. Intermittent fault
• CEM-1D08: Control Module. Internal Fault. Permanent Fault (2001-2004)
  • Diagnostic trouble code (DTC) information
  • Internal fault. Permanent fault
    • Checking programming
    • Replacing the control module
• CEM-1D09: Control Module. Internal Fault (2005-2009)
  • Diagnostic trouble code (DTC) information CEM-1D09
  • Internal fault
    • Replacing the component
    • Information
      • Fault-tracing information
• CEM-1D09: Control Module. Internal Fault. Intermittent Fault (2001-2004)
  • Diagnostic trouble code (DTC) information
  • Internal fault. Intermittent fault
• CEM-1D09: Control Module. Internal Fault. Permanent Fault (2001-2004)
  • Diagnostic trouble code (DTC) information
  • Internal fault. Permanent fault
    • Checking programming
    • Replacing the control module
• CEM-1D0A: Control Module. Internal Fault (2005-2009)
  • Diagnostic trouble code (DTC) information CEM-1D0A
  • Internal fault
    • Replacing the component
    • Information
      • Fault-tracing information
• CEM-1D0A: Control Module. Internal Fault. Intermittent Fault (2001-2004)
  • Diagnostic trouble code (DTC) information
  • Internal fault. Intermittent fault
• CEM-1D0A: Control Module. Internal Fault. Permanent Fault (2001-2004)
  • Diagnostic trouble code (DTC) information
  • Internal fault. Permanent fault
    • Checking programming
    • Replacing the control module
• CEM-1D0B: Control Module. Internal Fault (2005-2009)
  • Diagnostic trouble code (DTC) information CEM-1D0B
  • Internal fault
    • Replacing the component
    • Information
      • Fault-tracing information
• CEM-1D0C: Control Module. Internal Fault. Intermittent Fault (2001-2004)
  • Diagnostic trouble code (DTC) information
  • Internal fault. Intermittent fault
    • Fault-tracing information
• CEM-1D0C: Control Module. Internal Fault. Permanent Fault (2001-2004)
  • Diagnostic trouble code (DTC) information
  • Internal fault. Permanent fault
    • Checking programming
    • Replacing the control module
• CEM-1E04: Communication With The Lamp Switch Module. Signal Missing. Intermittent Fault (2001-2004)
  • Diagnostic trouble code (DTC) information
  • Signal missing. Intermittent fault
    • Fault-tracing information
• CEM-1E04: Communication With The Lamp Switch Module. Signal Missing. Permanent Fault (2001-2004)
  • Diagnostic trouble code (DTC) information
  • Signal missing. Permanent fault
    • Checking components
    • Replacing the lamp switch module
    • Verification
      • Verification
    • Information
      • Fault-tracing information
• CEM-1E05: Communication With The Additional Heater Module. Signal Missing. Intermittent Fault (2001-2004)
  • Diagnostic trouble code (DTC) information
  • Signal missing. Intermittent fault
    • Fault-tracing information
• CEM-1E05: Communication With The Additional Heater Module. Signal Missing. Permanent Fault (2001-2004)
  • Diagnostic trouble code (DTC) information
  • Signal missing. Permanent fault
    • Checking components
    • Replacing the additional heater module
    • Verification
      • Verification
    • Information
      • Fault-tracing information
• CEM-1F00: ECM, Software. Faulty Signal (2005-2009)
  • Diagnostic trouble code (DTC) information CEM-1F00
  • Faulty signal
    • Checking programming
    • Replacing software
• CEM-1F01: TCM, Software. Faulty Signal (2005-2009)
  • Diagnostic trouble code (DTC) information CEM-1F01
  • Faulty signal
    • Checking programming
    • Replacing software
• CEM-2E01: Power Steering. Signal Faulty. Intermittent Fault (2001-2004)
  • Diagnostic trouble code (DTC) information
  • Signal faulty. Intermittent fault
    • Intermittent fault
    • Stepper motor, steering gear, replacing
      • Removing the electric motor on the speed related power steering control valve during replacement
      • Installing the electric motor on the speed related power steering control valve during replacement
    • Replacing the steering gear
      • Notes
      • Removal
        • Notes
        • Installing lifting tools
        • Disconnecting the connector
        • Removing track rod ends
        • Measuring the position of the track rod in the steering gear
        • Removing the splash guard
        • Removing the bracket for the exhaust pipe
        • Removing the collision protection system over the steering gear
        • Removing the nuts and screw for the steering gear
        • Lowering the sub-frame at the rear edge
        • Removing steering gear
      • Installation
        • Installing steering gear
        • Checking the position of the track rod in the steering gear
        • Installing the sub-frame at the rear edge
        • Installing the cable harness for the heated oxygen sensors (HO2S)
        • Installing the bracket for the exhaust pipe
        • Installing the track rod ends on the steering arms
        • Removing the lifting tools
        • Finishing
    • Information
      • Fault-tracing information
• CEM-2E01: Power Steering. Signal Faulty. Permanent Fault (2001-2004)
  • Diagnostic trouble code (DTC) information
  • Faulty signal. Permanent fault
    • Checking the signal cable
    • Checking the component
    • Verification
      • Verification
    • Information
      • Fault-tracing information
• CEM-2E03: Power Steering. Faulty Set-Up (2001-2004)
  • Diagnostic trouble code (DTC) information
  • Initiation fault. Permanent fault
    • Replacing the component
    • Verification
      • Verification
    • Information
      • Fault-tracing information
• CEM-2E04: Power Steering. Configuration Fault (2002-2004)
  • Configuration fault
    • Ordering software
    • Programming
    • Programming control module
      • Programming procedures
    • Programming the seat temperature (central electronic module)
      • Programming the seat temperature (central electronic module)
      • Celsius
      • Fahrenheit
      • Checking the left seat
      • Checking the right seat
      • Save the programmed value
    • Programming the home safe lights
      • Programming the home safe lights
      • Save the programmed value
    • Programming daytime running lamps
      • Programming daytime running lamps
      • Save the programmed value
    • Programming the wiper function for the rear windshield (5 door models)
      • Programming the wiper function for the rear windshield (5 door models)
      • Save the programmed value
  • Diagnostic trouble code (DTC) information
• CEM-2E04: Power Steering. Parameter Fault (2001)
  • Diagnostic trouble code (DTC) information
  • Parameter fault. Permanent fault
    • Replacing the component
    • Verification
      • Verification
    • Information
      • Fault-tracing information
• CEM-2FA1: Driver SEATBELT Lock. Signal Too High. Intermittent Fault (2001-2002)
  • Diagnostic trouble code (DTC) information
  • Signal too high. Intermittent fault
    • Checking the component and wiring
    • Replacing the component
    • Verification
      • Verification
    • Information
      • Fault-tracing information
• CEM-2FA1: Driver SEATBELT Lock. Signal Too High. Permanent Fault (2001-2002)
  • Diagnostic trouble code (DTC) information
  • Signal too high. Permanent fault
    • Checking the component and wiring
    • Replacing the component
    • Verification
      • Verification
    • Information
      • Fault-tracing information
• CEM-2FA2: Driver SEATBELT Lock. Signal Too Low. Intermittent Fault (2001-2002)
  • Diagnostic trouble code (DTC) information
  • Signal too low. Intermittent fault
    • Checking the component and wiring
    • Replacing the component
    • Verification
      • Verification
    • Information
      • Fault-tracing information
• CEM-2FA2: Driver SEATBELT Lock. Signal Too Low. Permanent Fault (2001-2002)
  • Diagnostic trouble code (DTC) information
  • Signal too low. Permanent fault
    • Checking the component and wiring
    • Replacing the component
    • Verification
      • Verification
    • Information
      • Fault-tracing information
• CEM-2FA3: Driver SEATBELT Lock. Signal Faulty. Permanent Fault (2001-2002)
  • Diagnostic trouble code (DTC) information
  • Faulty signal
    • Checking the component and wiring
    • Replacing the component
    • Verification
      • Verification
    • Information
      • Fault-tracing information
• CEM-2FA4: Passenger SEATBELT Lock. Signal Too High. Intermittent Fault (2001-2002)
  • Diagnostic trouble code (DTC) information
  • Signal too high. Intermittent fault
    • Checking the component and wiring
    • Replacing the component
    • Verification
      • Verification
    • Information
      • Fault-tracing information
• CEM-2FA4: Passenger SEATBELT Lock. Signal Too High. Permanent Fault (2001-2002)
  • Diagnostic trouble code (DTC) information
  • Signal too high. Permanent fault
    • Checking the component and wiring
    • Replacing the component
    • Verification
      • Verification
    • Information
      • Fault-tracing information
• CEM-2FA5: Passenger SEATBELT Lock. Signal Too Low. Intermittent Fault (2001-2002)
  • Diagnostic trouble code (DTC) information
  • Signal too low. Intermittent fault
    • Checking the component and wiring
    • Replacing the component
    • Verification
      • Verification
    • Information
      • Fault-tracing information
• CEM-2FA5: Passenger SEATBELT Lock. Signal Too Low. Permanent Fault (2001-2002)
  • Diagnostic trouble code (DTC) information
  • Signal too low. Permanent fault
    • Checking the component and wiring
    • Replacing the component
    • Verification
      • Verification
    • Information
      • Fault-tracing information
• CEM-2FA6: Passenger SEATBELT Lock. Signal Faulty. Permanent Fault (2001-2002)
  • Diagnostic trouble code (DTC) information
  • Faulty signal
    • Checking the component and wiring
    • Replacing the component
    • Verification
      • Verification
    • Information
      • Fault-tracing information
• CEM-3A01: Fuel Pump. Signal Missing. Permanent Fault (2001-2004)
  • Diagnostic trouble code (DTC) information
  • Signal missing. Permanent fault
    • Checking the signal cable
    • Verification
      • Verification
    • Information
      • Fault-tracing information
• CEM-3A02: Fuel Pump. Signal Faulty (2001-2004)
  • Diagnostic trouble code (DTC) information
  • Faulty signal
    • Checking the relay
    • Verification
      • Verification
    • Information
      • Fault-tracing information
• CEM-3A03: Fuel Pump. Signal Too Low. Intermittent Fault (2001-2004)
  • Diagnostic trouble code (DTC) information
  • Signal too low. Intermittent fault
    • Intermittent fault
    • Information
      • Fault-tracing information
• CEM-3A03: Fuel Pump. Signal Too Low. Permanent Fault (2001-2004)
  • Diagnostic trouble code (DTC) information
  • Signal too low. Permanent fault
    • Checking fuse 11C/33 (15A)
    • Checking the signal cable for open circuit
    • Checking the signal cable for short circuit to ground
    • Replacing the component - fuse
    • Replacing the component - fuel pump relay
    • Verification
      • Verification
    • Information
      • Fault-tracing information
• CEM-3A04: Fuel Pump. Signal Too High. Intermittent Fault (2001-2004)
  • Diagnostic trouble code (DTC) information
  • Signal too high. Intermittent fault
    • Intermittent fault
    • Information
      • Fault-tracing information
• CEM-3A04: Fuel Pump. Signal Too High. Permanent Fault (2001-2004)
  • Diagnostic trouble code (DTC) information
  • Signal too high. Permanent fault
    • Checking the signal wire
    • Replacing the component
    • Verification
      • Verification
    • Information
      • Fault-tracing information
• CEM-3A05: Fuel Pump. Signal Too Low. Intermittent Fault (2001-2004)
  • Diagnostic trouble code information
  • Signal too low. Intermittent fault
    • Checking the relay
    • Information
      • Fault-tracing information
• CEM-3A05: Fuel Pump. Signal Too Low. Permanent Fault (2001-2004)
  • Diagnostic trouble code information
  • Signal too low. Permanent fault
    • Checking the relay
    • Verification
      • Verification
    • Information
      • Fault-tracing information
• CEM-3A07: Relay, Leak Diagnostic Pump Heating. Signal Too High (2002-2004)
  • Diagnostic trouble code (DTC) information
  • Signal too high
    • Checking and replacing the component
    • Checking the control module
    • Verification
      • Verification
    • Information
      • Fault-tracing information
• CEM-3A08: Relay, Leak Diagnostic Pump Heating. Signal Too Low (2002-2004)
  • Diagnostic trouble code (DTC) information
  • Signal too low
    • Checking and replacing the component
    • Replacing the component
    • Checking the control module for open-circuits
    • Checking the control module for short-circuits
    • Verification
      • Verification
    • Information
      • Fault-tracing information
• CEM-3F02: Shift Lock Signal. Signal Too High (2005-2009)
  • Diagnostic trouble code (DTC) information CEM-3F02
  • Signal too high
    • Checking the wiring
    • Verification
      • Verification
    • Information
      • Fault-tracing information
• CEM-3F02: Shift Lock Signal. Signal Too High. Intermittent Fault (2001-2004)
  • Diagnostic trouble code information
  • Signal too high. Intermittent fault
    • Intermittent fault
    • Information
      • Fault-tracing information
• CEM-3F02: Shift Lock Signal. Signal Too High. Permanent Fault (2001-2004)
  • Diagnostic trouble code information
  • Signal too high. Permanent fault
    • Checking the relay
    • Checking the signal wire
    • Replacing the component
    • Verification
      • Verification
    • Information
      • Fault-tracing information
• CEM-3F03: Shift Lock Signal. Signal Missing. Intermittent Fault (2001-2004)
  • Diagnostic trouble code information
  • Signal missing. Intermittent fault
    • Intermittent fault
    • Information
      • Fault-tracing information
• CEM-3F03: Shift Lock Signal. Signal Missing. Permanent Fault (2001-2004)
  • Diagnostic trouble code information
  • Signal missing. Permanent fault
    • Checking the relay
    • Checking the signal cable
    • Replacing the component
    • Verification
      • Verification
    • Information
      • Fault-tracing information
• CEM-3F03: Shift Lock Signal. Signal Too Low (2005-2009)
  • Diagnostic trouble code (DTC) information CEM-3F03
  • Signal too low
    • Checking the wiring
    • Verification
      • Verification
    • Information
      • Fault-tracing information
• CEM-3F81: Immobilizer Signal. Signal Too High (2005-2009)
  • Diagnostic trouble code (DTC) information CEM-3F81
  • Signal too high
    • Checking the wiring
    • Verification
      • Verification
    • Information
      • Fault-tracing information
• CEM-3F81: Immobilizer Signal. Signal Too High. Intermittent Fault (2001-2004)
  • Diagnostic trouble code (DTC) information
  • Signal too high. Intermittent fault
    • Intermittent fault
    • Information
      • Fault-tracing information
• CEM-3F81: Immobilizer Signal. Signal Too High. Permanent Fault (2001-2004)
  • Diagnostic trouble code (DTC) information
  • Signal too high. Permanent fault
    • Checking the relay
    • Checking the signal cable
    • Replacing the component
    • Verification
      • Verification
    • Information
      • Fault-tracing information
• CEM-3F82: Immobilizer Signal. Signal Too Low (2005-2009)
  • Diagnostic trouble code (DTC) information CEM-3F82
  • Signal too low
    • Checking the wiring
    • Verification
      • Verification
    • Information
      • Fault-tracing information
• CEM-3F82: Immobilizer Signal. Signal Too Low. Intermittent Fault (2001-2004)
  • Diagnostic trouble code (DTC) information
  • Signal too low. Intermittent fault
    • Intermittent fault
    • Information
      • Fault-tracing information
• CEM-3F82: Immobilizer Signal. Signal Too Low. Permanent Fault (2001-2004)
  • Diagnostic trouble code (DTC) information
  • Signal too low. Permanent fault
    • Checking the signal cable
    • Replacing the component
    • Verification
      • Verification
    • Information
      • Fault-tracing information
• CEM-3F83: Immobilizer Signal. Signal Too Low (2005-2009)
  • Diagnostic trouble code (DTC) information CEM-3F83
  • Signal too low
    • Checking the wiring
    • Verification
      • Verification
    • Information
      • Fault-tracing information
• CEM-3F84: Immobilizer Signal. Faulty Signal (2005-2009)
  • Diagnostic trouble code (DTC) information CEM-3F84
  • Faulty signal
    • Checking the wiring
    • Verification
      • Verification
    • Information
      • Fault-tracing information
• CEM-3F90: Fuel Pump Relay. Open-Circuit Or Short-Circuit To Ground (2005-2009)
  • Diagnostic trouble code (DTC) information CEM-3F90
  • Open-circuit or short-circuit to ground
    • Checking the wiring
    • Verification
      • Verification
    • Information
      • Fault-tracing information
• CEM-3F91: Fuel Pump Relay. Short-Circuit To Supply Voltage (2005-2009)
  • Diagnostic trouble code (DTC) information CEM-3F91
  • Short-circuit to supply voltage
    • Checking the wiring
    • Replacing the component
    • Verification
      • Verification
    • Information
      • Fault-tracing information
• CEM-4A31: Ejector Sensor. Faulty Signal (2005-2009)
  • Diagnostic trouble code (DTC) information CEM-4A31
  • Faulty signal
    • Checking the wiring
    • Replacing the component
    • Verification
      • Verification
    • Information
      • Fault-tracing information
• CEM-4A33: Fuel Level Sensor. Short-Circuit To Supply Voltage Or Open-Circuit (2005-2009)
  • Diagnostic trouble code (DTC) information CEM-4A33
  • Short-circuit to supply voltage or open-circuit
    • Checking the wiring
    • Verification
      • Verification
    • Information
      • Fault-tracing information
• CEM-4A34: Fuel Level Sensor. Short-Circuit To Ground (2005-2009)
  • Diagnostic trouble code (DTC) information CEM-4A34
  • Short-circuit to ground
    • Checking the wiring
    • Verification
      • Verification
    • Information
      • Fault-tracing information
• CEM-4A35: Fuel Level Sensor. Faulty Signal (2005-2009)
  • Diagnostic trouble code (DTC) information CEM-4A35
  • Faulty signal
    • Checking the wiring
    • Replacing the component
    • Verification
      • Verification
    • Information
      • Fault-tracing information
• CEM-4A37: Fuel Level Sensor. Short-Circuit To Supply Voltage Or Open-Circuit (2005-2009)
  • Diagnostic trouble code (DTC) information CEM-4A37
  • Short-circuit to supply voltage or open-circuit
    • Checking the wiring
    • Verification
      • Verification
    • Information
      • Fault-tracing information
• CEM-4A38: Fuel Level Sensor. Short-Circuit To Ground (2005-2009)
  • Diagnostic trouble code (DTC) information CEM-4A38
  • Short-circuit to ground
    • Checking the wiring
    • Verification
      • Verification
    • Information
      • Fault-tracing information
• CEM-4F00: Reset Button. Activated Too Long (2005-2009)
  • Activated too long
    • Checking the control
    • Verification
      • Verification
    • Information
      • Fault-tracing information
  • Diagnostic trouble code (DTC) information CEM-4F00
• CEM-4F01: Read Button. Activated Too Long (2005-2009)
  • Activated too long
    • Checking the control
    • Verification
      • Verification
    • Information
      • Fault-tracing information
  • Diagnostic trouble code (DTC) information CEM-4F01
• CEM-4F41: Light Emitting Diode, Left Camera Module. Signal Too Low (2005-2009)
  • Diagnostic trouble code (DTC) information CEM-4F41
  • Signal too low
    • Checking the function
    • Checking the wiring
    • Fault-tracing information
    • Verification
      • Verification
    • Information
      • Fault-tracing information
• CEM-4F42: Light Emitting Diode, Right Camera Module. Signal Too Low (2005-2009)
  • Diagnostic trouble code (DTC) information CEM-4F42
  • Signal too low
    • Checking the function
    • Checking the wiring
    • Fault-tracing information
    • Verification
      • Verification
    • Information
      • Fault-tracing information
• CEM-4F43: Light Emitting Diode, Left Camera Module. Signal Too High (2005-2009)
  • Diagnostic trouble code (DTC) information CEM-4F43
  • Signal too high
    • Checking the function
    • Checking the wiring
    • Fault-tracing information
    • Verification
      • Verification
    • Information
      • Fault-tracing information
• CEM-4F44: Light Emitting Diode, Right Camera Module. Signal Too High (2005-2009)
  • Diagnostic trouble code (DTC) information CEM-4F44
  • Signal too high
    • Checking the function
    • Checking the wiring
    • Fault-tracing information
    • Verification
      • Verification
    • Information
      • Fault-tracing information
• CEM-4F45: Light Emitting Diode, Left Camera Module. No Signal (2005-2009)
  • Diagnostic trouble code (DTC) information CEM-4F45
  • Signal missing
    • Checking the function
    • Checking the wiring
    • Fault-tracing information
    • Verification
      • Verification
    • Information
      • Fault-tracing information
• CEM-4F46: Light Emitting Diode, Right Camera Module. No Signal (2005-2009)
  • Diagnostic trouble code (DTC) information CEM-4F46
  • Signal missing
    • Checking the function
    • Checking the wiring
    • Fault-tracing information
    • Verification
      • Verification
    • Information
      • Fault-tracing information
• CEM-4F47: Left Camera Module. Internal Fault (2005-2009)
  • Diagnostic trouble code (DTC) information CEM-4F47
  • Internal fault
    • Replacing the component
    • Information
      • Fault-tracing information
• CEM-4F48: Right Camera Module (RCM). Internal Fault (2005-2009)
  • Diagnostic trouble code (DTC) information CEM-4F48
  • Internal fault
    • Replacing the component
    • Information
      • Fault-tracing information
• CEM-4F90: Seat Belt Reminder. Signal Too High (2005-2009)
  • Diagnostic trouble code (DTC) information CEM-4F90
  • Signal too high
    • Checking components and wiring
    • Verification
      • Verification
    • Information
      • Fault-tracing information
• CEM-4F91: Seat Belt Reminder. Signal Too Low (2005-2009)
  • Diagnostic trouble code (DTC) information CEM-4F91
  • Signal too low
    • Checking components and wiring
      • Checking components and wiring
    • Verification
      • Verification
    • Information
      • Fault-tracing information
• Diagnostic Testing Procedures
  • Inspect terminals visually
  • Open-circuit, intermittent faults
  • Open-circuit, permanent faults
  • Short-circuit to ground, intermittent faults
  • Short-circuit to ground, permanent faults
  • Short-circuit to supply voltage, intermittent faults
  • Short-circuit to supply voltage, permanent faults
  • Loose connections (terminals)
  • Contact resistance and oxidation