Checking the wiring

Unplug the LED connector and check that the LED is intact. Also check the connector for contact resistance and corrosion.

Check the signal lead between the left camera module (LCM) and the #1 LED connector for shorting to ground.

Remedy as necessary.

Other information 

• See Signal specification
• Change the light emitting diode, see: Replacing the mirror
• See Checking wiring and terminals

Fig 3: Identifying Connector Terminals

Courtesy of VOLVO CARS OF NORTH AMERICA.

Fig 4: Identifying Left Camera Module

Courtesy of VOLVO CARS OF NORTH AMERICA.

Refer to Verification