LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Volvo >> 2007 >> S60 Base, AWD >> Repair and Diagnosis >> External Pages >> Different car >> Section 73 (Electrical Accessories - Design And Function) >> Driver Information Module (1999-2001) >> System overview >> Signals
April 5, 2026: LEMON Manuals is launched! Read the announcement.

System overview: Signals

WARNING: This page does not describe the selected car, but rather 8 other vehicles, including the 2006 Volvo S80, 2005 Volvo S80, 2004 Volvo S80, 2003 Volvo S80, and 2002 Volvo S80. However, it is still accessible from the selected car via links, so may be relevant.

The table below summarizes input and output signals to and from the driver information module. The signal types are divided into directly connected signals, serial communication and Control area network (CAN) communication. The graphic below displays the same information with the Volvo part numbers.

Input signals Output signals
Directly connected:  Directly connected: 
Parking brake switch, 3/47 -
Malfunction indicator lamp (MIL) -
Brake fluid level sensor, 7/4 -
- -
Via Control Area Network (CAN):  Via Control Area Network (CAN): 
Brake control module (ABS), 4/16 Brake control module (ABS), 4/16
Central electronic module, 4/56 Central electronic module, 4/56
ECM, 4/46 Phone module, 16/60
Phone module, 16/60 SRS, 4/9
SRS, 4/9 RTI,16/45
TCM (4/28) Climate control module, 3/112
Rear electrical module, 4/58 -
Steering wheel module, 3/130 -
Fig 1: Driver Information Module Input And Output Signals
GLL106248Courtesy of VOLVO CARS OF NORTH AMERICA.