Activating components/functions: Heater
WARNING: This page is about a different variant/trim than selected.
Activating the heater.
In case of too low battery voltage or if the heater is in a state that prohibits activation, the heater will abort the activation. In order to enable start of the heater itself, battery voltage shall be normal, coolant temperature must be lower than +96 °C, and the heater's post-run/stop sequence must be completed. There must also be enough fuel in the tank.
CAUTION:
If the heater or other components are not activated, try closing down the activation window and then starting the activation again with the symbol for VCT2000.