Downloading software and replacing the control module

WARNING: This page does not describe the selected car, but rather 7 other vehicles, including the 2007 Volvo V70, 2006 Volvo V70, 2005 Volvo V70, 2004 Volvo V70, and 2003 Volvo V70. However, it is still accessible from the selected car via links, so may be relevant.

New software can be downloaded into the rear electronic module (REM). When ordering software, the hardware and the software in the car is compared to the information in the Volvo central database. If the comparison is OK the software is downloaded to the control module.

If the comparison between the car and Volvo central database is not OK, the database is updated with the car configuration. When this is complete the software is downloaded.

For further information regarding downloading, see VIDA Design and Function, Downloading Software.

The control module is mounted in a relay box behind the left-hand cargo compartment panel. To replace the rear electronic module (REM), remove it from the relay box.

For cars with Bi-Xenon lamps, the position sensor for headlamp range adjustment must be calibrated when the control module is replaced. This is carried out in VIDA via the vehicle communication socket. See function group 3, Rear Electronic Module (REM).