Signal Description
WARNING: This page does not describe the selected car, but rather 8 other vehicles, including the 2013 Volvo C70, 2012 Volvo C70, 2011 Volvo C70, 2010 Volvo C70, and 2009 Volvo C70. However, it is still accessible from the selected car via links, so may be relevant.
General
| U= | DC voltage in volts (V) | UAC = | AC voltage in volts (V) |
| Ubat = | Battery voltage (V) | f = | Frequency in Hertz (Hz) |
| Ulow = | Voltage approximately 0 V | t = | Time in seconds |
| PWM = | Pulse width modulated signal as a % |
CONNECTOR C1
| Breakout box terminal | Control module terminal | Signal type | Ignition on | Other |
| - | #C1-1 | Power supply | U = Ubat | |
| - | #C1-2 | Ground, power supply | U = Ulow | |
| - | #C1-3 | Reserve | - | |
| - | #C1-4 | Reserve | - |
CONNECTOR C2
| Breakout box terminal | Control module terminal | Signal type | Ignition on | Other |
| - | #C2-1 | MOST input signal | Optical input signal when the MOST network is activated | |
| - | #C2-2 | MOST output signal | Optical output signal when the MOST network is activated |