Transmission Fluid, Replacing: Refilling
WARNING: This page does not describe the selected car, but rather 12 other vehicles, including the 2014 Volvo XC90, 2013 Volvo XC90, 2012 Volvo XC90, 2011 Volvo XC90, and 2010 Volvo XC90. However, it is still accessible from the selected car via links, so may be relevant.
Apply the parking brake. Move the gear selector lever to position P.
Fill with approximately 2 liters of oil.
Start the engine. Allow the engine to idle.
Turn the engine off when air bubbles start to become visible in the hose.
Fill with approximately 2 liters of oil.
Start the engine again and let it idle.
Turn the engine off when air bubbles start to become visible in the hose.
Remove the hose from the oil cooler hose. Detach it from the connection to the cooler. Install the hose in the normal position on the cooler and the transmission.