Installing The Climate Control Unit
WARNING: This page does not describe the selected car, but rather 8 other vehicles, including the 2013 Volvo C70, 2012 Volvo C70, 2011 Volvo C70, 2010 Volvo C70, and 2009 Volvo C70. However, it is still accessible from the selected car via links, so may be relevant.
Install:
- the climate control unit
- the drainage hose from the heat exchanger housing
Install the pipes to the heat exchanger as follows:
see: HEAT EXCHANGER
Install:
- the 1 M8 screw securing the air conditioning (A/C) pipes to the evaporator in the engine compartment. Tighten
- both the air conditioning (A/C) hoses in their mountings below the right-hand spring strut turret
- the spacer that holds the heat exchanger and evaporator pipes apart
- the 2 screws and the right-hand half of the lead-in. Tighten
- the dashboard. Do not install the glove compartment. See: DASHBOARD
- the drain nipple on the radiator.
Fill with coolant and warm up the engine until the thermostat opens. Top up if necessary.
Check that the pipe coupling does not leak.