ECM-P061513: Starter Relay Circuit. General Electrical Failures. Circuit Open (B6324S; 2007-2010): Fault-Tracing: Verification: Verification

HINT: After carrying out the repair, check that the fault has been remedied. 

Fig 1: Engine Start Verification

Courtesy of VOLVO CARS CORPORATION

Fig 2: Identifying Connector(s) Reinstallation

Courtesy of VOLVO CARS CORPORATION

• Ignition off
• Reconnect the connectors, components, etc.
• Run the starter motor/start the engine.
• Allow the engine to idle if it starts.
• Read the diagnostic status and fault status for the diagnostic trouble code by selecting the diagnostic trouble code in the list.

  Check the fault status for the diagnostic trouble code when the scan is "Implemented". When the function is correct the fault status should be "No fault found" when the scan is implemented.

  Fig 3: Identifying VCT2000 Diagnostic Tool Symbol In VIDA

  Courtesy of VOLVO CARS CORPORATION

Is the function OK? 

• YES 

  VERIFIED:  Troubleshooting has been completed.

• NO 

  Refer to INFORMATION