Test Sequence
WARNING: This page does not describe the selected car, but rather 12 other vehicles, including the 2014 Volvo XC90, 2013 Volvo XC90, 2012 Volvo XC90, 2011 Volvo XC90, and 2010 Volvo XC90. However, it is still accessible from the selected car via links, so may be relevant.
| Procedure | Expected result | Remarks |
| 1. Insert the key and turn on the ignition. | The lighting in the screen's button illuminates and the system is set to standby mode. | |
| 2. Activate the DVD device on the driver's side using the remote control by first pressing and then. | Only the DVD device on the driver's side is activated and the Volvo emblem appears on the screen. | If the DVD device on the passenger side is activated, the DVD device must be recoded. See: DESIGN - Service menu for changing DRIVER/PASSENGER settings |
| 3. Activate the DVD device on the passenger side using the remote control by first pressing and then. | Only the DVD device on the passenger side is activated and the Volvo emblem appears on the screen. | If the DVD device on the driver's side is activated, the DVD device must be recoded. See: DESIGN - Service menu for changing DRIVER/PASSENGER settings |
| 4. Ensure that the correct DVD region is coded in. This is done manually on each DVD device. | See: DESIGN - Changing the region code in the DVD device | |
| 5. Ensure that the system is in standby and then switch off the ignition. |