Programming Remote Controls
WARNING: This page does not describe the selected car, but rather 12 other vehicles, including the 2014 Volvo XC90, 2013 Volvo XC90, 2012 Volvo XC90, 2011 Volvo XC90, and 2010 Volvo XC90. However, it is still accessible from the selected car via links, so may be relevant.
Add remote control
This function is used when the customer wishes to order extra remote controls in addition to those supplied on delivery. The PIN-code for a new remote control must be programmed into the control module memory before the remote control can be used.
The control module memory has room for six remote controls.
Removing remote controls
This function is used when the customer wishes to erase one or more remote controls from the control module memory, so that the remote control cannot be used any longer. All the available remote controls should be at hand when erasing is being carried out.