Section 31 (Steering - Removal, Replacement And Installation)
WARNING: This page does not describe the selected car, but rather 12 other vehicles, including the 2014 Volvo XC90, 2013 Volvo XC90, 2012 Volvo XC90, 2011 Volvo XC90, and 2010 Volvo XC90. However, it is still accessible from the selected car via links, so may be relevant.
- Steering Gear (B8444S; 2005-2011)
- Solenoid, Steering Gear, Replacement
- Steering Gear, Replacement
- Notes
- Removal
- Installing The Lifting Tool
- Removing The Wing Liner
- Removing The Bolts To The Engine Pad, Right
- Removing The Protective Cover Under The Engine
- Removing The Exhaust Pipes Between Front And Rear Catalytic Converters
- Removing The Lower Bolt To The Rear Engine Pad
- Removing The Steering Shaft Joint, Lower
- Removing The Track Rod Ends
- Lowering The SUBFRAME At The Rear Edge
- Removing The Pressure Pipe And Return Pipe From The Steering Gear
- Removing The Metal Protective Cover
- Removing The Steering Gear
- Installation
- Notes
- Installing The Steering Gear
- Installing The Metal Protective Cover
- Installing The Oil Pipes To The Steering Gear
- Installing The SUBFRAME At The Rear Edge
- Fitting The Lower Bolt To The Rear Engine Pad
- Installing The Steering Arms To The Wheel Spindles
- Installing The Steering Shaft Joint, Lower
- Installing The Exhaust Pipes Between Front And Rear Catalytic Converters
- Installing The Protective Cover Under The Engine
- Fitting The Bolts To The Engine Pad, Right
- Installing The Wing Liner
- Removing The Lifting Tool
- Fitting The Bolts To The Torque Rod
- Filling The Power Steering Fluid Reservoir
- Finishing
- Steering Wheel, Steering Wheel Lock, Steering Column, Shaft (2005-2014)
- Lever Steering Wheel Adjustment, Replacing
- Steering Column, Replacing
- Notes
- Preparatory Work
- Removing Components
- Removing The Steering Wheel
- Removing Steering Column Covers
- Removing The Gear Selector Assembly And Steering Wheel Module
- Removing The Steering Wheel Lock Module
- Removing The Cable For Ignition Switch Interlock (Automatic Transmissions Only)
- Removing The Cable Harness
- Removing The Lower Steering Shaft Joint
- Removing Steering Column
- Transferring Components
- Installing
- Installing The Steering Column
- Installing The Lower Steering Shaft Joint
- Installing The Cable Harness
- Installing The Cable For Ignition Switch Interlock (Vehicles With Automatic Transmissions Only).
- Installing The Steering Wheel Lock Module
- Installing The Gear Selector Assembly And Steering Wheel Module
- Installing Steering Column Covers
- Installing The Steering Wheel
- Finishing
- Steering Shaft, Lower, Replacing
- Steering Wheel Lock, Replacing
- Notes
- Replacing
- Installing
- Installing The Steering Wheel Lock
- Installing The Connectors On The Steering Wheel Module (SWM)
- Installing The Mechanical Cable For The Ignition Switch Interlock (Only Applies To Cars With Automatic Transmissions)
- Installing The Steering Wheel Lock Unit
- Installing The Steering Column Covers
- Finishing
- Ordering Software / Keys
- Function Test
- Steering Wheel Module (SWM), Replacing
- Steering Wheel, Replacing
- Steering Wheel, Steering Wheel Lock, Steering Column, Shaft (2003-2004)
- Steering Gear (2003-2004)
- Steering Gear (B5254T2; 2005-2007)
- Steering Gear (B6294T; 2005-2006)
- Steering Gear (B6324S; 2007-2010)
- Steering Gear (B6324S5; 2011-2014)
- Power Steering Equipment (2003-2004)
- Power Steering Equipment (B5254T2; 2005-2007)
- Power Steering Equipment (B6294T; 2005-2006)
- Servo Equipment (2007-2014)
- Servo Equipment (B6324S; 2007-2010)
- Oil Cooler, Power Steering
- Power Steering Delivery Pipe
- Power Steering Pump
- Return Pipe/Hose, Steering Gear, Replacement
- Removal
- Notes
- Preparations
- Removing The Return Pipe
- Removing The Bolts To The Torque Rod
- Installing The Lifting Tool
- Removing The Wing Liner
- Removing The Bolts To The Right-Hand Engine Pad
- Removing The Protective Plate
- Removing The Protective Cover Under The Engine
- Removing The Gearbox Bolts To The Lower Torque Rod
- Removing The Exhaust Pipes Between Front And Rear Catalytic Converters
- Removing The Lower Bolt To The Front Engine Pad
- Removing The Lower Bolt To The Rear Engine Pad
- Removing The Lower Steering Shaft Joint
- Lowering The SUBFRAME
- Removing The Return Pipe, Continued
- Installation
- Installing The Return Pipe
- Installing The SUBFRAME
- Fitting The Lower Bolt To The Rear Engine Pad
- Fitting The Lower Bolt To The Front Engine Pad
- Installing The Gearbox Bolts To The Lower Torque Rod
- Installing The Lower Steering Shaft Joint
- Installing The Exhaust Pipes Between Front And Rear Catalytic Converters
- Installing The Protective Cover Under The Engine
- Installing The Protective Plate
- Fitting The Bolts To The Right-Hand Engine Pad
- Installing The Wing Liner
- Removing The Lifting Tool
- Fitting The Bolts To The Torque Rod
- Filling The Power Steering Fluid Reservoir
- Finishing
- Additive Air System
- Removal
- Servo Equipment (B6324S5; 2011-2014)
- Servo Equipment (B8444S; 2005-2011)
- Delivery Pipes/Hose Steering Gear, Replacing
- Notes
- Removal
- Preparations
- Draining The Power Steering Fluid Reservoir
- Removing The Engine Casing
- Removing The Protective Cover Over The Power Steering Pump
- Removing The Pressure Pipe
- Removing The Bolts To The Torque Rod
- Installing The Lifting Tool
- Removing The Wing Liner
- Removing The Bolts To The Right-Hand Engine Pad
- Removing The Protective Plate
- Removing The Protective Cover Under The Engine
- Removing The Gearbox Bolts To The Lower Torque Rod
- Removing The Exhaust Pipes Between Front And Rear Catalytic Converters
- Removing The Lower Bolt To The Front Engine Pad
- Removing The Lower Bolt To The Rear Engine Pad
- Removing The Steering Shaft Joint, Lower
- Lowering The SUBFRAME
- Removing The Pressure Pipe, Continued
- Installation
- Installing The Pressure Pipe
- Installing The SUBFRAME
- Fitting The Lower Bolt To The Rear Engine Pad
- Fitting The Lower Bolt To The Front Engine Pad
- Installing The Gearbox Bolts To The Lower Torque Rod
- Installing The Steering Shaft Joint, Lower
- Installing The Exhaust Pipes Between Front And Rear Catalytic Converters
- Installing The Protective Cover Under The Engine
- Installing The Protective Plate
- Fitting The Bolts To The Right-Hand Engine Pad
- Installing The Wing Liner
- Removing The Lifting Tool
- Fitting The Bolts To The Torque Rod
- Filling The Power Steering Fluid Reservoir
- Installing The Protective Cover Over The Power Steering Pump
- Finishing
- Power Steering Pump, Replacing
- Replacing Power Steering Pump Pulley
- Return Pipe/Hose, Steering Gear, Replacement
- Notes
- Removal
- Preparations
- Removing The Return Pipe
- Removing The Bolts To The Torque Rod
- Installing The Lifting Tool
- Removing The Wing Liner
- Removing The Bolts To The Right-Hand Engine Pad
- Removing The Protective Plate
- Removing The Protective Cover Under The Engine
- Removing The Gearbox Bolts To The Lower Torque Rod
- Removing The Exhaust Pipes Between Front And Rear Catalytic Converters
- Removing The Lower Bolt To The Front Engine Pad
- Removing The Lower Bolt To The Rear Engine Pad
- Removing The Lower Steering Shaft Joint
- Lowering The SUBFRAME
- Removing The Return Pipe, Continued
- Installation
- Notes
- Installing The Return Pipe
- Installing The SUBFRAME
- Fitting The Lower Bolt To The Rear Engine Pad
- Fitting The Lower Bolt To The Front Engine Pad
- Installing The Gearbox Bolts To The Lower Torque Rod
- Installing The Lower Steering Shaft Joint
- Installing The Exhaust Pipes Between Front And Rear Catalytic Converters
- Installing The Protective Cover Under The Engine
- Installing The Protective Plate
- Fitting The Bolts To The Right-Hand Engine Pad
- Installing The Wing Liner
- Removing The Lifting Tool
- Fitting The Bolts To The Torque Rod
- Filling The Power Steering Fluid Reservoir
- Finishing
- Delivery Pipes/Hose Steering Gear, Replacing