LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Volvo >> 2009 >> V70 >> Repair and Diagnosis >> External Pages >> Different car >> Section 31 (Steering - Removal, Replacement And Installation) >> Steering Wheel, Steering Wheel Lock, Steering Column, Shaft (2005-2014) >> Steering Wheel Module (SWM), Replacing >> Programming The Control Module
September 30: LEMON manuals is back up on a temporary server! Slowness is possible

Programming The Control Module

WARNING: This page does not describe the selected car, but rather 12 other vehicles, including the 2014 Volvo XC90, 2013 Volvo XC90, 2012 Volvo XC90, 2011 Volvo XC90, and 2010 Volvo XC90. However, it is still accessible from the selected car via links, so may be relevant.

Program the new control module. See the table below:

NOTE:

Software must be downloaded to the Steering wheel module (SWM) for vehicles up to and including model year 2004. Software must only be downloaded to the Steering Angle Sensor Module (SAS) for vehicles from and including model year 2005 if the vehicle is equipped with DSTC. For 2005- vehicles, without DSTC, software does not have to be downloaded.

-2004 9438286
2005-
NOTE:

Applies to vehicles equipped with DSTC.

9438417