Generator (Gen) (2005-2014): Function: Notes

WARNING: This page does not describe the selected car, but rather 12 other vehicles, including the 2014 Volvo XC90, 2013 Volvo XC90, 2012 Volvo XC90, 2011 Volvo XC90, and 2010 Volvo XC90. However, it is still accessible from the selected car via links, so may be relevant.

GENERAL

Fig 1: Identifying ACM To CEM Communication Link

Courtesy of VOLVO CARS CORPORATION

Fig 2: Identifying ACM, ECM & CEM Communication Link

Courtesy of VOLVO CARS CORPORATION

The above illustrations depict the two different types of connections for the alternator's regulator.

Output voltage from the generator (GEN) is calculated from the calculated battery temperature in order to charge the battery fully. The central electronic module (CEM) calculates the battery temperature using the outside temperature. The outside temperature is obtained from the outside temperature sensor.

The Rear electronic module (REM) checks the voltage on the battery and transmits the value out on the CAN network. The value is used in the Central electronic module (CEM), among others, for diagnosing the charging function.