Checking Resistance

Fig 1: Identifying Ignition OFF

Courtesy of VOLVO CARS CORPORATION

Fig 2: Identifying Connector(s) Disconnected

Courtesy of VOLVO CARS CORPORATION

• Ignition off
• Disconnect transmission connector D.

  Check solenoid SLS. Measure the resistance between terminals #D5 and #D6 on transmission connector D. The resistance should be 5-5.6 Ω at 20°C.

  Other information: 

  • To disconnect the transmission connectors, see CONNECTORS, TRANSMISSION, DISCONNECTING / CONNECTING
  • For information about signals, see SIGNAL DESCRIPTION. TRANSMISSION CONTROL MODULE (TCM) .
  Fig 3: Identifying 8-Pin Transmission Connector Terminals

  Courtesy of VOLVO CARS CORPORATION
  Fig 4: Identifying Ohms Display

  Courtesy of VOLVO CARS CORPORATION

Was the resistance OK? 

• YES 

  Refer to CHECKING THE WIRING 

• NO 

  Refer to CHECKING THE WIRING AND COMPONENT