Signal Specification
WARNING: This page does not describe the selected car, but rather 12 other vehicles, including the 2014 Volvo XC90, 2013 Volvo XC90, 2012 Volvo XC90, 2011 Volvo XC90, and 2010 Volvo XC90. However, it is still accessible from the selected car via links, so may be relevant.
| U= | DC voltage in volts (V) | UAC = | AC voltage in volts (V) |
| Ubat = | Battery voltage (V) | f = | Frequency in Hertz (Hz) |
| Ulow = | Voltage approximately 0 V | t = | Time in seconds |
| PWM = | Pulse width modulated signal as a % | - | - |
CONNECTOR C1
| Breakout box terminal | Control module terminal | Signal type | Ignition on | Other |
| - | #C1-1 | Power supply | U = Ubat | - |
| - | #C1-2 | Ground, power supply | U = Ulow | - |
| - | #C1-3 | Reserve | - | - |
| - | #C1-4 | Reserve | - | - |
| - | #C1-5 | MOST input signal | Optical input signal when the MOST network is activated | - |
| - | #C1-6 | MOST output signal | Optical output signal when the MOST network is activated | - |