LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Volvo >> 2010 >> XC70 Base, 3.2 96 >> Repair and Diagnosis >> External Pages >> Different car >> Section 44 (Alarm, Electrical Control Modules, Brakes, Brake Control Module (BCM) - Design And Function) >> Audio Module (AUD) >> System Overview >> Signals
April 5, 2026: LEMON Manuals is launched! Read the announcement.

System Overview: Signals

WARNING: This page is about a different car, the 2010 Volvo V70, 2009 Volvo V70, and 2008 Volvo V70. However, it is still accessible from the selected car via links, so may be relevant.

The table below summarizes the input signals to and output signals from the audio module (AUD). The signal types are divided into directly connected signals and MOST communication. The graphic below displays the same information with the Volvo component designations.

Input signals Output signals
Directly connected:  Directly connected: 
  • Power supply
  • Ground
  • Headphone panel (control signal) (16/111)
  • Loudspeaker left front (16/4, 16/55)
  • Loudspeaker right front (16/3, 16/56)
  • Loudspeaker left rear (16/6, 16/136)
  • Loudspeaker right rear (16/5, 16/137)
  • Center loudspeaker (16/26) (option).
  • Headphone panel (16/111)
Via MOST communication:  (ring network) Via MOST communication:  (ring network)
  • Infotainment control module (ICM) (3/281), main control module
  • Integrated audio module (IAM) (16/1)
  • Phone module (PHM) (16/60).
  • Bluetooth phone module (BPM) (16/147)
  • Multimedia module (MMM) (16/108)
  • Infotainment control module (ICM) (3/281), main control module
  • Multimedia module (MMM) (16/108)
Fig 1: Identifying Input Signals And Output Signals From Audio Module
GLL153753Courtesy of VOLVO CARS CORPORATION