Downloading Software And Replacing The Control Module: Installation
WARNING: This page does not describe the selected car, but rather 8 other vehicles, including the 2013 Volvo C70, 2012 Volvo C70, 2011 Volvo C70, 2010 Volvo C70, and 2009 Volvo C70. However, it is still accessible from the selected car via links, so may be relevant.
When installing the Alcohol Analyzing Start Inhibitor, the handset unit code/ID is stored in the Central electronic module (CEM). Only one handset unit can be programmed for the vehicle. If the unit were to break or need replacing, a new one can be programmed. The handset unit is programmed via the Software manager in VIDA (Volvo scan tool).
At installation, also select which BYPASS variant the vehicle is to have; emergency function (single) or multiple.
Single BYPASS can only be used once and must then be reset by erasing diagnostic trouble codes from the Central electronic module (CEM).
Multiple BYPASS can be used indefinitely.