Control DSTC
WARNING: This page does not describe the selected car, but rather 8 other vehicles, including the 2013 Volvo C70, 2012 Volvo C70, 2011 Volvo C70, 2010 Volvo C70, and 2009 Volvo C70. However, it is still accessible from the selected car via links, so may be relevant.
Activation of DSTC is controlled by turning the control for the Steering wheel module (SWM). When the ignition is activated the DSTC function is always engaged. When selecting the DSTC function the on/off mode is available. When the control sets DSTC in mode on/off, this is confirmed by a message in the Driver information module (DIM).
If a diagnostic trouble code (DTC) is stored in the brake control module (BCM) a message is displayed in the Driver information module (DIM). The messages vary depending on whether the diagnostic trouble code (DTC) was stored when the DSTC function was active or inactive.